Our Equipment
The Liquidator® System consists of four main components:
Control Unit
The LiquiTech® electronic control unit can be configured to control output current levels by multiple methods, which directly relates to the amount of ions released into the water. Such methods include current set points which will maintain the current according to its set point indefinitely, internal timer functions which can be programmed for every day of the week to operate only at specific intervals, remote contact input such as a flow switch, and analog inputs from sources such as a flow meter or a copper analyzer. Should any user-configured trip points occur or failures be detected, two independent 120 volt 10 amp alarm relays are provided for remote functions.
Flow Cell
The flow-cells housing the copper/silver electrodes are comprised of high temperature, high pressure, schedule 80 CPVC. Electrode spacers are fabricated from DuPont PBT polyester resin. The flow-cells are supplied with LiquiTech® quick-connect stainless steel clamps for ease of installation. Flow-cells are available in various sizes and configurations depending upon the application. Standard 150-pound flanges with 304 stainless steal nuts, bolts and washers are also available. The entire LiquiTech® Electronic Disinfection System including Controller, Flow-Cell and interconnecting wire is ETL (UL-508 and 1081) certified. LiquiTech® products conform to the European Union EMC Directive 89/336/EEC and the Low Voltage Directive 72/23/EEC and bear the CE Mark.
Flow Meter
The LiquiTech® computerized electronic control units are supplied with “closed-loop proportional control” which automatically produces precise levels of copper and silver ions proportional to flow rates (water consumption) measured by a flow meter. It is installed in the cold water make up to the heat source or the hot water supply to the facility, whichever is most practical. The copper analyzer is installed to sample copper levels in the hot water storage tank or recirculation system. The flow meters supplied are Blue-White Industries Sonic-Pro™ S3C Hybrid Ultrasonic flow meters.
Remote Engineer Management System (REMS)
Our Liquidator® systems are capable of remote supervisory control via internet access through a local network. These remote functions include real time display and alarms, system diagnostics, system configuration, remote data logging, and all control function adjustments. The ability for LiquiTech Engineers to remotely monitor and make adjustments to our client's systems is a key component to our Maintenance, Monitoring, and Service (MMS) Program.
